¶ Smart Formulas Guide
¶ Overview
Smart Formulas are a way to combine and adjust sensor data from multiple sensors. Smart Formulas do not disrupt the original sensor readings unlike Calibrations. Smart Formulas are a way to create
¶ Adding a Smart Formula
|
|
| Template | Smart Formulas are complicated so here you can choose from several templates. Once selecting a template you can't go back to the free form Smart Formulas unless you start over. |
| Formula Name | This is the name of the Smart Formula. |
| Time Slot | This is the sampling time the Smart Formula will take from in minutes. |
| Units | Enter in the units of the graph being made. |
| Sensors | Choose the sensor(s) that will be apart of the Formula. Don't forget to assign the sensor a letter. Typically the letter would be ‘x’ or ‘y’ but it can be any letter you wish. |
| Formula |
This is where you enter the formula to calibrate the sensor, using ‘x’ and ‘y’ and all the letters you chose in the Sensors part of the popup . For example to simply add all the Sensors together the formula would be ‘x + y + … + etc’. To multiply all of the Sensors together the formula would look like ‘xyz * …* etc’. For additional help making formulas, press the Help button next to Test Formula or contact support at info@neatmon.com |
| Test Formula | Press Test Formula to make sure the formula is valid, if so the ‘Invalid Formula’ text will change to ‘Valid Formula’ and will display the created formula. |
¶ Editing Smart Formulas
|
¶ Deleting Smart Formulas
|
WARNING: Pressing delete does not give a prompt, be certain the Smart Formula you are deleting is the one that should be deleted.